Apantac KVM-SET-14 is a KVM-IP-Tx-PL Extender and KVM-IP-Rx-P Receiver over IP bundle. The KVM-IP-Rx-P is a KVM Receiver over IP, HDMI with POE USB Mouse & USB Keyboard over Gigabit Ethernet, up to 170 meters (Point to point) and 100 meters (from a GigE switch) up to 4K/UHD @ 30Hz. The KVM-IP-TX-PL is a KVM Extender over IP, HDMI with Looping Input and POE, USB Mouse & USB Keyboard over Gigabit Ethernet, up to 170 meters (Point to point), 100 meters (to a GigE switch) up to 4K/UHD @ 30Hz.
Features- Based on Gigabit Ethernet Technology (IGMP and Jumbo frame)
- Transmitter has built-in HDMI looping input with POE
- Receiver with POE
- Supports up to 170 meters point to point extension with CAT6 cable
- Supports up to 100 meters when used with a GigE switch
- Supports HDMI inputs and output signals
- Supports point to point (Unicast), point to multi-point (Multicast) for Audio/Video distribution
- Receiver has 4 USB ports that supports both HID and transparent USB (for USB storage, and tablets)
- Supports bi-directional stereo audio. Both embedded HDMI as well as external stereo input
- Supports RS-232 communication between Tx and Rx
- Built-in webpage for configuration
- Connection manager software for Tx/Rx management
- Supports resolutions up to 4K/UHD @ 30Hz
- Built-in Scaler
- LED Status indicators
- Plug and Play
Specifications- Input TX/RX: 3.5mm Stereo Phone Jack
- TX: USB TYPE B (Female)
- RX: 4x USB Type A (Female)
- Input RX: RJ45
- Output TX: RJ45
- RS-232 Baud Rate: 3-pin Pheonix Connector / up to 115,200 bps / Full Duplex
- Video Resolution: Maximum 4K/[email protected]
- Interconnect Cable: Standard CAT6/CAT6a/CAT7 network cable
- Power: DC 12V, 1.5A
- Power Consumption: 400 mA
- Dimension: 6.03 x 3.47 x 1.24 in.
- Weight: 2.5 lbs