Apantac KVM-IP-TX-PL is a KVM Extender over IP, HDMI with Looping Input and POE, USB Mouse & USB Keyboard over Gigabit Ethernet, up to 170 meters (Point to point), 100 meters (to a GigE switch) up to 4K/UHD @ 30Hz.
Features- KVM-IP-Tx/Rx are based on Gigbit Ethernet (IGMP and Jumbo frame) technology
- Supports up to 170 meters point to point with CAT6 cables
- Supports up to 100 meters when using with a GigE Switch
- Supports HDMI, DVI or analog VGA (slide switch) input and output signals
- Supports point-to-point (Unicast), one-to-many (Multicast) for Audio/Video distribution
- Supports KVM extension/switching connected via USB
- Receiver unit has 4 USB ports to easily extend peripherals such as flash drives, keyboard and mouse
- Supports data transfer (USB attached drives) from Rx to Tx
- Supports USB touch screen extension
- Supports bi-directional stereo audio. (Example, speakers or microphones on the Rx)
- Supports RS-232 communication between Tx and Rx
- Built-in webpage for basic configuration (setting of IP address, device name, Multi/Unicast, Baud Rate and etc)
- Connection Manager Software for Tx/Rx management
- Supports resolution up to 1920x1080 (HDMI/VGA) / 1920X1200 (DVI)
- EDID Copy function
- Built-ion scaler function
Specifications- Input: HDMI
- Output: HDMI
- Input: 3.5 mm Stereo Phone Jack
- Output: 3.5 mm Stereo Phone Jack
- TX: USB Type B (Female)
- Output: RJ45
- Video Resolution: Maximum 4K/[email protected]
- Interconnect Cable: Standard CAT6/CAT6a/CAT7 network cable
- Power: DC 12V, 1.5A
- Power Consumption: 400 mA
- Dimension: 6.03 x 3.47 x 1.24"
- Weight: 1.2 lbs