A Flexiverter is an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit.
Format combinations provide the most common conversions with improved features and unique pairings (e. g. AES50 <> Dante, Dante <> Dante SRC, Dante <> AVB).
Features- 192x192 channels bi-directional transmission of 24-bit uncompressed audio
- Super-low link latency of 4 samples
- Dedicated, high-quality reference clock signal with automatic configuration
- Power supply for connected devices (to reduce cabling), and redundancy
- Uses standard HDMI cables (with locking screws), to provide easy field replacement in case of defects
- 3 Possible Flexiverter Applications - Stand Alone, Dual Mode and Multiverter Extension
- Status LEDs For Each Port
- DIP Switches for Advanced Configuration
- USB for Firmware Updates
- AUX Port for Optional Format Module
Item Includes:- 1x FLX-AES3 Flexiverter Device
- 1x AC Power Cord (country specific)
- 1x User Manual
Specifications- Size: 16 x 16 in.
- Redundant Power Supply: up to 2x
- Sample Rate Conversion: No
- Signal Splitting: Yes (to AUX or FlexLink)
- Channel-wise Routing: No
- Remote Control: No
- Channels (all can be used at the same time): 16x16 AES3 @ 48 kHz 16x16 AES3 @ 96 kHz 16x16 AES3 @ 192 kHz plus what the AUX card provides
- Redundant Power Supply: up to 3x
- Battery-powered Operation (DC 12-15V): Yes
- Sample Rate Conversion: No
- Signal Splitting: Yes (to AUX or FlexLink)
- Channel-wise Routing: No
- Remote Control: No
- Redundant Power Supply: up to 3x
- Sample Rate Conversion: Yes (with SRC-64 card in Multiverter)
- Signal Splitting: Yes, to everything
- Channel-wise Routing: Yes, via MVR-64 (web, telnet or serial terminal)
- Remote Control: Yes, via MVR-64 (web, telnet or serial terminal)
- Dimension: 152x44x153mm (WxHxD) excluding connectors/buttons, 152x44x169mm (WxHxD) including device-side connectors/buttons
- Power Consumption: +15V DC, 9W max (18W to power two devices via FlexLink)Triple-redundant input (2x DC, 1x via FlexLink)
- Cable Length: FlexLink 1m / 3ft. max. recommended
- Sample Rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz
- Channel Count: 16x16 @ 48/96/192 kHz (Single-wire), 8x8 @ 96kHz, 8x8 @ 192kHz (Dual wire), 4x4 @ 192 kHz (Quad wire)
- Weight: 1.23 lbs