The Doug Fleenor Design 127-5 is a bi-directional DMX512/RDM splitter with 5 pin XLR connectors. Each of the eight ports is fully isolated, and bi-directional with optical isolation, fault protection to 60V, and transient protection to 15KV. The unit has a universal voltage power supply and uses slew-rate-limited output drivers. Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables.
Specifications- Input Circuit: EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data
- Input Protection: Undamaged by up to 60 Volts continuous, 15KV transients.
- Input Signal: DMx512, DMx512/1990, DMx512-A, or RDM. 0.2 volts minimum, 12 volts maximum
- Signal Connectors: Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 optional)
- Termination: Input and all outputs are terminated per RDM specifications.
- Power Input: 100 to 240 VAC 50/60 Hz, 1/2 Amp
- Indicators: Red LED for POWER. Green LED for presence of DMx512 or RDM.
- Isolation: All eight ports are electrically isolated from each other to 1000 Volts.
- Back: Black, Top, Bottom, Sides - Silver Hammertone
- Size and Weight Capacity: 1.7"H x 6.5"D x 16.5"W, 4.5 pounds
- Environmental: 0-40deg C (32-104deg F), 10-90% humidity, non-condensing
- Mounting: Capable of being installed in a standard rack with a rack kit (model RK16-1)
- Weight: 4.5 lbs
