The XHD6801+ series features broadcast-quality, motion-adaptive HD conversion with block artifact and mosquito noise reduction.
Offered as a 3-slot solution for the 6800+ core processing platform, it is equivalent to providing three format converters in a single RU. Additionally, the XHD6801+ features reclocked outputs that can be reconfigured for frame synchronization. This minimizes the requirement downstream for additional signal distribution or synchronization. The XHD6801+ also features Q-SEE enhanced monitoring and thumbnail streaming.
The XHD6801+ can be controlled manually via card-edge controls, or controlled and monitored via the CCS Navigator software application, HTTP web browser, NUCLEUS hardware control panels or third-party SNMP-based control applications. The module is Q-SEE -compliant, allowing for direct thumbnail monitoring when installed in an Ethernet-equipped 6800+ frame.
Features- HD/SD-capable up/down/cross converter with motion-adaptive de-interlacing, mosquito noise and block artifact noise reduction
- Edge interpolation for superior image quality
- User-selectable detail enhancement settings (edge sharpening/softening)
- Integrated video and audio frame sync with audio tracking and Delay capabilities to lip sync
- User-adjustable video Delay of up to eight frames in HD
- Embedded audio support with channel routing and sample rate conversion capability
Specifications- Regulatory Compliance: Q-SEE
- Certifications: SMPTE
- Input Signal Types: NTSC/PAL-B, SD/HD-SDI
- Output (Converted) Signal Type: HD-SDI
- Connector: BNC (IEC 169-8)
- Impedance: 75 ohms
- Return Loss: >40 dB 25 Hz to 10 MHz (SMPTE 318M-1999)
- Common Mode Range: 5.5 V pk-pk
- CMRR: 60 dB - 60 Hz, 5 V pk-pk
- Locking Range: +/-6 ppm (sync lock only, no burst lock)
- Signal Type: NTSC/PAL-B analog composite, ±300 mV tri-level sync
- Standard: SMPTE 170M (NTSC), ITU-R BT.470-6 (PAL-B), SMPTE 274M (1080i, 1080p), SMPTE 296M (720p)
- Number of Inputs: 1
- Standard: SMPTE 292M (1.485, 1.485/1.001 Gb/s)
- Connector: BNC (IEC 169-8)
- Impedance: 75 ohms
- Return Loss: >15 dB, typical, from 5 MHz to 1485 MHz
- Number of Inputs: 1
- Standard: SMPTE 259M-C (270 Mb/s, 525/625 component video)
- Connector: BNC (IEC 169-8)
- Impedance: 75 ohms
- Return Loss: >15 dB, typical, from 5 to 270 MHz
- Equalisation: Adaptive cable equalisation for up to 700 ft (230 m), typical of Belden 8281 coaxial cable
- Number of Outputs: 8
- Standard: SMPTE 292M (1.485, 1.485/1.001 Gb/s)
- Connector: BNC (IEC 169-8)
- Impedance: 75 ohms
- Return Loss: >15 dB, typical, from 5 to 1485 MHz
- Signal Level: 800 mV 10%
- DC Offset: 0 V & 0.5 V
- Weight: 2 lbs
