A Family of Brands
unbeatablesale
boncui
playingkitchen
funtoymall
halloween mall
petshopusa
toolschest
weddingandpartymall
allgourmetfood
collectablesmall
gadgetsandpresents
housedecormall
procurnow
stylish apparel
technooutlet
comfortmarket
greatermedical
jewelryshope
lighting-decor
travelbag
rewardsmalls
sportsrecreationmall

Doug Fleenor Design DFD-125-3 Input & 5-Outputs DMX Isolated Splitter

MSRP: $1,315.61
$1,012.01
Availability: In stock
SKU: TCNCD390267

The Doug Fleenor Design 125-3 DMX splitter is in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with miswiring and lightning protection, and a universal power supply is also (see the model 125EE data sheet). Units with any number of inputs and outputs may be manufactured on a custom basis. Each output is electrically isolated from the input, and from every other output, by 2500 volt optical couplers. Each output has its own line driver and associated power supply.

The DMX splitter allows connection of DMX receivers (dimmers, color changers, moving lights, etc.) in a star configuration as opposed to a daisy chain configuration. In a star configuration, each control cable is run to a central point, in this case the splitter. In a daisy chain configuration all the devices are connected on one control cable, the output of one feeding the input of the next. It is not good practice to simply split a DMX control cable using a "wye" cable as this can cause signal corruption due to reflections. Typical uses of the splitter include splitting the control signal between stage right and stage left dimmers, running an isolated split to a string of color changers, splitting and isolating a feed to a wall outlet for temporary or rented dimmers, isolating a stack of dimmer packs from each other, etc.

Features
  • Input is electrically isolated from output
  • Outputs are isolated from each other
  • Outputs are separately buffered
  • No user adjustments
  • DMX pinouts are printed on the splitter
  • Powder coated 1/10" aluminum chassis
  • Gold plated Neutrik 5 pin connectors
  • All integrated circuits are socketed
  • Uses 2500 Volt optical couplers
  • Forty times faster than DMX data rate
  • Air gap circuit board under isolator
  • 60 mA drive current
  • Power and input signal indicators
Specifications
  • Outputs: 5
  • Input Circuit: EIA-485 receiver with 120 ohm termination resistor between +Data and -Data
  • Input Signal: 0.2 volts minimum, 12 volts maximum
  • Output Circuit: EIA-485 driver
  • Connectors: Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 optional)
  • Isolation: 2500 volt optical coupler, 1500 volt split bobbin transformer
  • Power Input: 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)
  • Weight: 6 lbs
Products specifications
Attribute name Attribute value
MPN DFD-125-3