The Rane RAD22 adds flexible I/O capability to RANE DSP systems. It provides two mic and two line inputs via XLR/TRS combination jacks and an 1/8" (3.5mm) stereo line output for monitoring, recording or amplification. Smart muting allows for the disconnecting of XLR and 1/4" cables to prevent disruption to sound systems for hot-swapping of microphones - even with 24V phantom power applied. Connect the RAD22 to RANE DSP with a Cat5e (or better) cable for a local run up to 500 feet (150m) away from the equipment rack.
Each RAD22 may be installed onto a standard U.S. two-gang electrical box, or flush-mounted to a wall surface.
Features- 3.5mm TRS line output for recording, monitoring with headphones, and live sound amplification
- (2) XLR/TRS combo jack inputs with auto-switching for MIC or LINE level inputs
- Smart muting enables hot-swapping of inputs without sound system disruption
- RJ45 connection to Rane multiprocessor
- Standard enclosure and standard back box mounting options for US, UK and EU
- Isolation circuitry prevents hum due to long cable runs with ground differentials
- Improved codec for superior audio transmission
- Completes the RAD family while complimenting the RAD16z
Includes:- 1x RAD22
- 1x Mounting Plate
- 1x Screws
- 1x Installation Tools
- 1x User Guide
- 1x Safety & Warranty Manual
Specifications- Input Signal LEDs Green LED: 50 dBFS
- Input Signal LEDs Red LED: 0.5 dBFS
- Microphone Inputs: (Level set in hardware)
- Input Impedance: 2.16 k balanced (1.08 k + 1.08 k)
- Gain Range (dynamic mic mode): 26 - 46 dB, in 1 dB steps
- Gain Range (condenser mic mode): 14 - 34 dB, in 1 dB steps
- Max Input (dynamic mic mode): -16 dBu, Gain = 26 dB
- Max Input (condenser mic mode): -4 dBu, Gain = 14 dB
- Equivalent input Noise: -121 dBu, 20 kHz BW, Rs = 150, Gain = 26 dB
- CMRR: -70 dB, Rs = 150, 1kHz, Gain = 26dB
- Frequency Response: 20 Hz - 20 kHz, +0, -0.5 dB at all Gain settings
- THD + Noise: < 0.010% @ 1 kHz, 20 kHz BW, Rs = 150, Output = -6 dBFS, Gain = 26
- Phantom Power: 24VDC, 10mA Max
- Digital Codec: 48kHz/24-bit
- Impedance: 200, 1%, each leg
- Maximum Output: 14 dBu, < 1% THD, 10 k load
- Dynamic Range: 106 dB, 0 dBFS, 20 kHz BW, A-weighted
- Frequency Response: 20 Hz - 20 kHz, +0.0/-0.5 dB
- THD + Noise: 0.008% @ 1 kHz, 20 kHz BW, -6 dBFS output
- Dimension (width x depth x height): 5.6" x 1.4" x 4.8" (143 x 36 x 123mm)
- Weight: 1 lbs
