The all-new Cobalt 9960-TG2-REF1 3G/HD/SD-SDI Dual Test Signal Generator with Moving Box Active Signal Indication and Bi-Level Sync Out offers an easy to use, economical solution to providing comprehensive test signal packs to ensure validity of downstream baseband SDI systems. The 9960-TG2-REF1 is an unprecedented first in the high-density openGear based card form factor. Two independent generator blocks can be set to offer dual test packs which can be simultaneously outputted or selectively fed to a single downstream path via a 2x4 output crosspoint. The 9960-TG2-REF1 also provides AES and analog audio test tones (both using 24-bit data), and also provides waveform-based test data over its CVBS video output. A moving-box insertion can be enabled to serve as a dynamic raster confidence check.
Features- Comprehensive test signal generation for SDI/analog video and baseband discrete audio in an easily integrated openGear card
- Easy to use, intuitive, flexible, and far more economical than typical bench equipment
- Fully-independent dual generator blocks offer simultaneous output of user-configured test packs, or instant user selection between generators via output crosspoint
- Moving-box/motion insertion enable serves as an easy to use dynamic raster confidence check
- SDI import allows insertion of user static raster/patterns as an alternative addition to standard test pattern outputs
- DID/SDID authoring allows custom payloads to be written to specific DID/SDID locations as test packets for downstream systems
- Full suite of output interfaces - SDI, CVBS, AES and analog audio
- Convenience RS-485 LTC output works with legacy systems and checks bi-phase LTC/SMPTE 12M correlation in mixed systems
- Low-power/high-density design - less than 18 Watts per card
- Remote control/monitoring via Dashboard software or OGCP-9000 remote control panels
Specifications- SDI Formats Supported: SMPTE 259M, SMPTE 292M, SMPTE 424M
- Analog Reference Level: -20 dBFS
- Analog Nominal Level: +4 dBu
- Analog Max Output Level: +24 dBu (0 dBFS)
- Analog Freq. Response: ±0.2 dB (20 Hz to 20 kHz)
- Analog Analog THD+N: -96 dB (20 Hz to 10 kHz)
- Bulk delay control: -33 msec to +3000 msec
- Return Loss: >35 dB up to 5.75 MHz
- Weight: 2 lbs
