The Adder RED2 provides your installation with the power to grow on demand. HoUsed within a 1U 19-inch rack mount module, The RED2 PSU delivers up to sixteen lockable power 12VDC outputs and is pre-fited with one removable power supply and has remote management.Power to match your needs.While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors Can become unwieldy and difficult to manage. RED PSU2 provides a significant step up in terms of efficiency, reliability and power management8 or 16 port power outputs with locking connectorsRED PSU two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each Uses a locking connector to guard against accidental disconnectionHot swappable power modulesConversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module Can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis with full load transferring immediately to one should the other cease operationProtectionPower integrity, safety and management are core elements of the RED PSU system.
Features- 16 port Independently controllable 12V outputs
- 2 hot swappable power modules
- REST API for 3rd party control integration
- 500,000hrs MTBF ratings on power modules
- 12V to 5V cable converters units with 5V power feeds.
Specifications- Efficiency: 0.92
- Power Factor: 0.99 typical
- Peripheral Connections: 1x 8p8c for 10/100 Ethernet connection.
- Weight: 10 lbs
